The 2026 Daiwa Zillion TW 150 is a six-model baitcasting-reel family built around a 36 mm × 24 mm (1.42 × 0.94 in) G1 duralumin MAG-Z Boost spool. The design combines a full-aluminum housing, increased line capacity, three retrieve rates, and right- or left-hand configurations.
2026 Daiwa Zillion TW 150. Official product image supplied by Daiwa.
Core Zillion TW 150 Specifications
Every model weighs 215 g (7.6 oz), uses a 95 mm (3.74 in) aluminum crank handle, and lists 8 ball bearings plus 1 roller bearing. Standard, high-speed, and extra-high-speed gearing provide 70 cm (27.6 in), 82 cm (32.3 in), and 94 cm (37.0 in) of line recovery per handle turn.
The reel is saltwater ready and has sufficient capacity for heavier monofilament, fluorocarbon, or braid. Converted braid capacity ranges from approximately 40 lb × 230 m to 80 lb × 80 m, with equivalent yard figures in the full specification tables.
36 mm MAG-Z Boost Spool
The spool is machined from G1 duralumin and uses Daiwa's LC, or Long Cast, brake concept. MAGFORCE-Z moves the induct rotor in response to centrifugal force, while the Boost mechanism changes braking in two stages during the cast. Daiwa positions this calibration for medium- and heavyweight lures rather than the lightest presentations.
G1 duralumin 36 mm × 24 mm MAG-Z Boost spool. Official Daiwa technical image.
Official capacity includes 16 lb × 125 m, 20 lb × 100 m, and 25 lb × 80 m for fluorocarbon. Converted braid strengths are approximately 40 lb × 230 m, 55 lb × 150 m, 60 lb × 100 m, and 80 lb × 80 m. Actual braid strength and diameter vary by manufacturer.
Wider Tapered T-Wing System
The Zillion TW 150 uses a wider, tapered T-Wing System aperture. The revised shape is intended to reduce resistance as thicker monofilament or a braid-to-leader connection passes through the levelwind during a cast.
Zillion TW 150 tapered T-Wing System compared with Daiwa's 100-size opening. Official Daiwa technical image.
Daiwa still recommends keeping the leader connection outside the rod guides to reduce the risk of the knot striking the guide train. The wider levelwind does not remove the need for an appropriately compact, correctly tied connection.
Full-Aluminum Hyperdrive Housing
The frame, gear-side plate, and dial-side set plate use aluminum alloy. This full-metal construction supports the four-part Hyperdrive Design: Hyperdrive Digigear, Hyper Double Support, Hyper Armed Housing, and Hyper Tough Clutch.
Hyperdrive Digigear uses G1 duralumin and a tooth profile designed to increase the engagement ratio without reducing tooth module. Hyper Double Support holds both ends of the pinion gear with ball bearings. Hyper Tough Clutch uses an insulated structure intended to reduce salt-related sticking.
ATD Drag and Drag-Release Click
ATD is designed to begin releasing line smoothly and continue applying drag as load changes. Maximum drag is 6 kg (13.2 lb) on the 6.3:1 and 7.3:1 models, and 5.5 kg (12.1 lb) on the 8.4:1 models.
Drag-release click assembly. Official Daiwa technical image.
The audible drag-release click indicates when a fish is pulling line against the drag. A large ZAION long-arm star drag provides external adjustment near the handle.
ZAION star drag, 95 mm aluminum handle, and high-grip power knobs. Official Daiwa technical image.
Perfect Double Stopper
The Perfect Double Stopper supplements the normal anti-reverse system with a mechanical stopper. If the primary infinite anti-reverse does not engage, the secondary mechanism is designed to prevent reverse handle rotation.
Secondary mechanical anti-reverse component. Official Daiwa technical image.
Which Gear Ratio Fits the Application?
150 / 150L: 6.3:1
These models recover 70 cm (27.6 in) per turn and provide the slowest, most controlled retrieve in the range. They are the neutral choice for presentations where excessive line pickup is unnecessary.
150H / 150HL: 7.3:1
The high-speed models recover 82 cm (32.3 in) per turn. This middle option balances faster slack collection with a less extreme ratio than the XH configuration.
150XH / 150XHL: 8.4:1
The fastest models recover 94 cm (37.0 in) per turn. They suit techniques that benefit from rapid slack pickup or quickly moving a lure away from cover, while listing slightly lower maximum drag than the other ratios.
2026 Daiwa Zillion TW 150 Specifications
Braid capacities are expressed as approximate breaking strength in pounds, paired with meters below and yards in the second table. This removes Japan-specific nominal line sizes while retaining usable capacity guidance.
Metric-Length Specifications
| Model |
Gear Ratio |
Max Drag |
Weight |
Spool Dia. / Width |
Fluorocarbon Capacity |
Braid Capacity |
Retrieve / Turn |
Handle |
BB / Roller |
Saltwater Ready |
| 150 / 150L |
6.3 |
6 kg |
215 g |
36 / 24 mm |
16 lb × 125 m, 20 lb × 100 m, 25 lb × 80 m |
40 lb × 230 m, 55 lb × 150 m, 60 lb × 100 m, 80 lb × 80 m |
70 cm |
95 mm |
8 / 1 |
Yes |
| 150H / 150HL |
7.3 |
6 kg |
215 g |
36 / 24 mm |
16 lb × 125 m, 20 lb × 100 m, 25 lb × 80 m |
40 lb × 230 m, 55 lb × 150 m, 60 lb × 100 m, 80 lb × 80 m |
82 cm |
95 mm |
8 / 1 |
Yes |
| 150XH / 150XHL |
8.4 |
5.5 kg |
215 g |
36 / 24 mm |
16 lb × 125 m, 20 lb × 100 m, 25 lb × 80 m |
40 lb × 230 m, 55 lb × 150 m, 60 lb × 100 m, 80 lb × 80 m |
94 cm |
95 mm |
8 / 1 |
Yes |
US Customary Specifications
| Model |
Gear Ratio |
Max Drag |
Weight |
Spool Dia. / Width |
Fluorocarbon Capacity |
Braid Capacity |
Retrieve / Turn |
Handle |
BB / Roller |
Saltwater Ready |
| 150 / 150L |
6.3 |
13.2 lb |
7.6 oz |
1.42 / 0.94 in |
16 lb × 135 yd, 20 lb × 110 yd, 25 lb × 90 yd |
40 lb × 250 yd, 55 lb × 165 yd, 60 lb × 110 yd, 80 lb × 90 yd |
27.6 in |
3.74 in |
8 / 1 |
Yes |
| 150H / 150HL |
7.3 |
13.2 lb |
7.6 oz |
1.42 / 0.94 in |
16 lb × 135 yd, 20 lb × 110 yd, 25 lb × 90 yd |
40 lb × 250 yd, 55 lb × 165 yd, 60 lb × 110 yd, 80 lb × 90 yd |
32.3 in |
3.74 in |
8 / 1 |
Yes |
| 150XH / 150XHL |
8.4 |
12.1 lb |
7.6 oz |
1.42 / 0.94 in |
16 lb × 135 yd, 20 lb × 110 yd, 25 lb × 90 yd |
40 lb × 250 yd, 55 lb × 165 yd, 60 lb × 110 yd, 80 lb × 90 yd |
37.0 in |
3.74 in |
8 / 1 |
Yes |
Braid-strength equivalents are approximate. Yard capacities are rounded to the nearest 5 yd.
Final Overview
The Zillion TW 150 combines a high-capacity 36 mm MAG-Z Boost spool, widened tapered T-Wing System, full-aluminum Hyperdrive housing, drag-release click, and a secondary mechanical anti-reverse. Model selection is primarily a choice of handle side and retrieve speed because body size, spool, capacity, handle, and bearing count remain consistent across the range.
Specifications and technical descriptions are based on Daiwa's Japan-market information. Availability and naming may vary by region.
