The 2026 Daiwa Zillion TW 150 returns the Zillion family to a 36 mm (1.42 in) spool in a 150-size low-profile reel. Its position is easier to understand by comparing it with Daiwa's earlier Zillion HD reels, the lighter Zillion SV TW, the round Ryoga 150, and the braid-specific Saltist TW PE Special 150.
2026 Daiwa Zillion TW 150. Official product image supplied by Daiwa.
What Defines the 2026 Zillion TW 150?
The reel combines a 36 × 24 mm (1.42 × 0.94 in) G1 duralumin spool with MAG-Z Boost braking, a full-aluminum housing, three gear ratios, and compatibility with fluorocarbon and braid. Every version weighs 215 g (7.6 oz), uses a 95 mm (3.74 in) handle, and is rated for saltwater use.
Its fluorocarbon capacity reaches 20 lb × 100 m (110 yd). Approximate braid capacity includes 55 lb × 150 m (165 yd), placing it above the 100-size Zillion platforms when more line or heavier line is required.
36 mm MAG-Z Boost Spool
MAG-Z Boost combines centrifugal movement of the induct rotor with two-stage brake reduction. Braking is strongest during the high-risk opening phase of a cast, then decreases as spool speed falls. The 36 mm diameter supports line release and recovery for medium- and heavyweight presentations, while the 24 mm width is narrower than the 27 mm spool used in the 2018 Zillion TW HD 1520.
36 × 24 mm G1 duralumin MAG-Z Boost spool. Official Daiwa technical image.
Tapered T-Wing System for Heavier Line
Daiwa widened and tapered the T-Wing System opening for this reel. The revised path is designed to reduce resistance from thick line and compact braid-to-leader connections as they pass through the levelwind. Daiwa still advises positioning the connection outside the rod guides during a cast to reduce impact risk.
The wider tapered T-Wing System compared with Daiwa's 100-size opening. Official Daiwa technical image.
Full-Aluminum Hyperdrive Construction
The frame, gear-side plate, and dial-side set plate are aluminum alloy. The housing supports Daiwa's four-part Hyperdrive Design: Hyperdrive Digigear, bearing-supported Hyper Double Support, Hyper Armed Housing, and the salt-resistant insulated structure of the Hyper Tough Clutch.
Full-aluminum housing and Hyperdrive construction. Official Daiwa technical image.
How the Daiwa Models Compare
The following table uses published dimensions and mechanisms to show the design direction of each reel. It does not assign subjective rankings: the relevant difference is whether the application prioritizes capacity, low mass, a round high-load body, or braid-only specialization.
| Reel |
Weight |
Spool |
Brake |
Gear Ratios |
Retrieve / Turn |
Handle |
Max Drag |
Primary Line Format |
Design Emphasis |
| 2026 Zillion TW 150 |
215 g (7.6 oz) |
36 × 24 mm (1.42 × 0.94 in) |
MAG-Z Boost |
6.3 / 7.3 / 8.4 |
70 / 82 / 94 cm (27.6 / 32.3 / 37.0 in) |
95 mm (3.74 in) |
6 kg (13.2 lb); XH 5.5 kg (12.1 lb) |
Fluorocarbon or braid |
High-capacity low-profile versatility |
| 2018 Zillion TW HD 1520 |
230 g (8.1 oz) |
36 × 27 mm (1.42 × 1.06 in) |
Magforce |
5.5 / 6.3 / 7.3 / 8.1 |
61 / 71 / 82 / 91 cm (24.0 / 28.0 / 32.3 / 35.8 in) |
100 mm (3.94 in) |
7 kg (15.4 lb) |
Fluorocarbon or braid |
Earlier wide-spool heavy-duty platform |
| 2022 Zillion TW HD 1000 |
200 g (7.1 oz) |
34 × 24 mm (1.34 × 0.94 in) |
MAG-Z Boost |
7.1 / 8.1 |
75 / 86 cm (29.5 / 33.9 in) |
100 mm (3.94 in) |
6 kg (13.2 lb) |
Fluorocarbon or braid |
More compact 34 mm heavy-duty platform |
| 2021 Zillion SV TW |
175 g (6.2 oz) |
34 × 24 mm (1.34 × 0.94 in) |
SV Boost |
5.5 / 6.3 / 7.1 / 8.5 |
59 / 67 / 75 / 90 cm (23.2 / 26.4 / 29.5 / 35.4 in) |
90 mm (3.54 in) |
5 kg (11.0 lb) |
Fluorocarbon |
Lower mass and SV-controlled casting |
| 2026 Ryoga 150 |
285–290 g (10.1–10.2 oz) |
36 × 27 mm (1.42 × 1.06 in) |
MAG-Z Boost |
5.3 / 7.3 |
59 / 82 cm (23.2 / 32.3 in) |
90 / 100 mm (3.54 / 3.94 in) |
6 kg (13.2 lb) |
Fluorocarbon or braid |
Round, machine-cut high-load platform |
| 2023 Saltist TW PE Special 150 |
220 g (7.8 oz) |
36 × 24 mm (1.42 × 0.94 in) |
Magforce Z |
8.4 |
94 cm (37.0 in) |
110 mm (4.33 in) |
6 kg (13.2 lb) |
Braid only |
Saltwater braid specialization |
Versus the 2018 Zillion TW HD 1520
Both reels use a 36 mm (1.42 in) spool, but the 2026 model narrows the spool from 27 mm (1.06 in) to 24 mm (0.94 in) and reduces reel weight by 15 g (0.5 oz). It also replaces the earlier brake and UTD drag arrangement with MAG-Z Boost and ATD, adds the tapered T-Wing System and an audible drag-release click, and uses a full-aluminum Hyperdrive housing. The 2018 reel retains the higher 7 kg (15.4 lb) maximum-drag rating and a 100 mm (3.94 in) handle.
Versus the 2022 Zillion TW HD 1000
The 2022 TW HD uses a smaller 34 × 24 mm (1.34 × 0.94 in) spool and weighs 200 g (7.1 oz). Both use MAG-Z Boost, but the 2026 TW 150 provides greater capacity through its 36 mm (1.42 in) spool and adds three retrieve-speed choices rather than two. The 2022 model is the more compact option; the 2026 model is the capacity-focused option.
Versus the 2021 Zillion SV TW
The SV TW is 40 g (1.4 oz) lighter and pairs a 34 mm (1.34 in) spool with SV Boost braking. That architecture emphasizes controlled response with less spool mass. The TW 150 instead provides substantially more line capacity, a larger spool, a full-aluminum structure, and hardware intended for heavier line and higher-load applications.
Versus the 2026 Ryoga 150
Ryoga 150 uses a round, machine-cut housing, a 36 × 27 mm (1.42 × 1.06 in) spool, and weighs 285–290 g (10.1–10.2 oz). Its 5.3:1 power ratio and high-strength gearing distinguish the low-speed model for sustained load. Zillion TW 150 is 70–75 g (2.5–2.6 oz) lighter, has a low-profile body and T-Wing System, and offers 6.3:1, 7.3:1, and 8.4:1 ratios.
Versus the 2023 Saltist TW PE Special 150
Saltist is a braid-only saltwater design with a dedicated spool profile, high-speed levelwind, 8.4:1 ratio, and 110 mm (4.33 in) handle. Zillion accepts fluorocarbon or braid, provides three ratios, and uses MAG-Z Boost rather than Magforce Z. Saltist is the specialized choice when braid is the only line format; Zillion offers broader line-format and retrieve-speed flexibility.
Drag Feedback and Backup Anti-Reverse
ATD is designed for a smooth start to line release as load rises. The 6.3:1 and 7.3:1 models have a 6 kg (13.2 lb) maximum drag, while the 8.4:1 models are rated at 5.5 kg (12.1 lb). An audible click identifies when the drag is releasing line.
Drag-release click mechanism. Official Daiwa technical image.
The Perfect Double Stopper adds a mechanical backup to the primary infinite anti-reverse system. Its purpose is to prevent reverse handle rotation if the primary system does not engage.
Perfect Double Stopper mechanical backup. Official Daiwa technical image.
Choosing a 2026 Zillion TW 150 Gear Ratio
-
150 / 150L, 6.3:1: 70 cm (27.6 in) per turn; the slowest retrieve in the range.
-
150H / 150HL, 7.3:1: 82 cm (32.3 in) per turn; the middle retrieve option.
-
150XH / 150XHL, 8.4:1: 94 cm (37.0 in) per turn; the fastest slack and lure recovery, with a 5.5 kg (12.1 lb) maximum drag rating.
Right- and left-hand versions share the same weight, spool, handle length, bearing count, and line capacity. Model selection therefore comes down primarily to handle side and recovery speed.
2026 Daiwa Zillion TW 150 Specifications
Braid capacities are stated as approximate breaking strength in pounds paired with length, rather than Japan-specific nominal line sizes. Actual diameter and capacity vary among line manufacturers.
Metric-Length Specifications
| Model |
Hand |
Gear Ratio |
Retrieve / Turn |
Max Drag |
Weight |
Spool Dia. / Width |
Fluorocarbon Capacity |
Braid Capacity |
Handle |
BB / Roller |
| 150 |
Right |
6.3 |
70 cm |
6 kg |
215 g |
36 / 24 mm |
16 lb × 125 m, 20 lb × 100 m, 25 lb × 80 m |
40 lb × 230 m, 55 lb × 150 m, 60 lb × 100 m, 80 lb × 80 m |
95 mm |
8 / 1 |
| 150L |
Left |
6.3 |
70 cm |
6 kg |
215 g |
36 / 24 mm |
16 lb × 125 m, 20 lb × 100 m, 25 lb × 80 m |
40 lb × 230 m, 55 lb × 150 m, 60 lb × 100 m, 80 lb × 80 m |
95 mm |
8 / 1 |
| 150H |
Right |
7.3 |
82 cm |
6 kg |
215 g |
36 / 24 mm |
16 lb × 125 m, 20 lb × 100 m, 25 lb × 80 m |
40 lb × 230 m, 55 lb × 150 m, 60 lb × 100 m, 80 lb × 80 m |
95 mm |
8 / 1 |
| 150HL |
Left |
7.3 |
82 cm |
6 kg |
215 g |
36 / 24 mm |
16 lb × 125 m, 20 lb × 100 m, 25 lb × 80 m |
40 lb × 230 m, 55 lb × 150 m, 60 lb × 100 m, 80 lb × 80 m |
95 mm |
8 / 1 |
| 150XH |
Right |
8.4 |
94 cm |
5.5 kg |
215 g |
36 / 24 mm |
16 lb × 125 m, 20 lb × 100 m, 25 lb × 80 m |
40 lb × 230 m, 55 lb × 150 m, 60 lb × 100 m, 80 lb × 80 m |
95 mm |
8 / 1 |
| 150XHL |
Left |
8.4 |
94 cm |
5.5 kg |
215 g |
36 / 24 mm |
16 lb × 125 m, 20 lb × 100 m, 25 lb × 80 m |
40 lb × 230 m, 55 lb × 150 m, 60 lb × 100 m, 80 lb × 80 m |
95 mm |
8 / 1 |
Specifications in Pounds, Yards & Inches
| Model |
Hand |
Gear Ratio |
Retrieve / Turn |
Max Drag |
Weight |
Spool Dia. / Width |
Fluorocarbon Capacity |
Braid Capacity |
Handle |
BB / Roller |
| 150 |
Right |
6.3 |
27.6 in |
13.2 lb |
7.6 oz |
1.42 / 0.94 in |
16 lb × 135 yd, 20 lb × 110 yd, 25 lb × 90 yd |
40 lb × 250 yd, 55 lb × 165 yd, 60 lb × 110 yd, 80 lb × 90 yd |
3.74 in |
8 / 1 |
| 150L |
Left |
6.3 |
27.6 in |
13.2 lb |
7.6 oz |
1.42 / 0.94 in |
16 lb × 135 yd, 20 lb × 110 yd, 25 lb × 90 yd |
40 lb × 250 yd, 55 lb × 165 yd, 60 lb × 110 yd, 80 lb × 90 yd |
3.74 in |
8 / 1 |
| 150H |
Right |
7.3 |
32.3 in |
13.2 lb |
7.6 oz |
1.42 / 0.94 in |
16 lb × 135 yd, 20 lb × 110 yd, 25 lb × 90 yd |
40 lb × 250 yd, 55 lb × 165 yd, 60 lb × 110 yd, 80 lb × 90 yd |
3.74 in |
8 / 1 |
| 150HL |
Left |
7.3 |
32.3 in |
13.2 lb |
7.6 oz |
1.42 / 0.94 in |
16 lb × 135 yd, 20 lb × 110 yd, 25 lb × 90 yd |
40 lb × 250 yd, 55 lb × 165 yd, 60 lb × 110 yd, 80 lb × 90 yd |
3.74 in |
8 / 1 |
| 150XH |
Right |
8.4 |
37.0 in |
12.1 lb |
7.6 oz |
1.42 / 0.94 in |
16 lb × 135 yd, 20 lb × 110 yd, 25 lb × 90 yd |
40 lb × 250 yd, 55 lb × 165 yd, 60 lb × 110 yd, 80 lb × 90 yd |
3.74 in |
8 / 1 |
| 150XHL |
Left |
8.4 |
37.0 in |
12.1 lb |
7.6 oz |
1.42 / 0.94 in |
16 lb × 135 yd, 20 lb × 110 yd, 25 lb × 90 yd |
40 lb × 250 yd, 55 lb × 165 yd, 60 lb × 110 yd, 80 lb × 90 yd |
3.74 in |
8 / 1 |
Braid equivalents are approximate. Yard capacities are rounded to the nearest 5 yd.
Comparison Summary
The 2026 Zillion TW 150 occupies the high-capacity, low-profile position in this group. The 2018 TW HD 1520 supplies the closest earlier 36 mm architecture; the 2022 TW HD 1000 and 2021 SV TW use more compact 34 mm spools; Ryoga 150 adds a heavier round machine-cut platform; and Saltist TW PE Special 150 narrows its role to braid-only saltwater use.
Specifications and technical descriptions are based on manufacturer information and the cited Japanese source article. Product naming and availability may vary by region.
