Description of "DAIWA 2023 SALTIST BF TW 8.1L PE SPECIAL"
Poids : 180g Longueur de récupération : 76cm/tour de poignée Rapport d'engrenage : 8,1 Capacité de ligne PE : #0,6 50-100m, #0,8 50-100m Roulement : 7/1 Force de traînée maximale : 3,5kg Longueur de la poignée : 80mm Diamètre de la bobine : 30mm Le Saltist TW PE SP vise à pouvoir être utilisé sans problème en se spécialisant dans le baitcasting PE en eau salée. Même les pêcheurs qui ont hésité à utiliser une ligne PE avec des moulinets de baitcasting peuvent désormais lancer en toute confiance. Ce qui a rendu cela possible, c'est le TWS, qui offre des propriétés de libération de ligne extrêmement élevées, et la bobine PE, qui a considérablement amélioré les conditions de réglage de la ligne et qui a des réglages spécifiquement conçus pour les lignes PE. De plus, les performances de base ont été affinées avec le design Hyper Drive, ce qui le rend compatible avec un large éventail de situations en eau salée. Disponible dans les tailles BF 80, 100, 150, 300 et 400, ce qui permet de cibler une plus grande variété d'espèces de poissons en eau salée. Une nouvelle norme en matière de moulinets de baitcasting SW pour les pêcheurs qui veulent profiter du baitcasting PE ou qui veulent la capacité de manipuler des lignes PE.
Technology Features of DAIWA 2023 SALTIST BF TW 8.1L PE SPECIAL
HYPERDRIVE DESIGN
In 2021, DAIWA’s new baitcasting reels underwent a significant evolution, marking a new era of innovation. The term that embodies this transformation is "HYPERDRIVE DESIGN." This new design philosophy aims to elevate all basic performance levels, ensuring they remain consistently high over time. At its core is the HYPERDRIVE DIGIGEAR, which includes both the drive and pinion gears. Supporting this are three additional key components: HYPER DOUBLE SUPPORT (pinion gear support system), HYPER ARMED HOUSING (reel body), and HYPER TOUGH CLUTCH. These four critical elements, refined with DAIWA's cutting-edge technology and new innovations, collectively deliver exceptional drive performance. A model featuring HYPERDRIVE DIGIGEAR and enhanced rotational performance falls under the HYPERDRIVE DESIGN category.
HYPERDRIVE DIGIGEAR
HYPERDRIVE DIGIGEAR is a newly designed gear system for baitcasting and conventional reels, engineered to maintain strong and smooth rotation over time. DAIWA’s unique technology avoids reducing the module size of the gear teeth, which is crucial for durability. Instead, it enhances meshing efficiency by shaping the gear teeth with a bullet-shaped silhouette that optimizes the pressure angle. This design ensures the initial smoothness of the reel lasts longer, achieving an exceptional balance between smooth rotation and rotational durability. Compared to previous DAIWA gears, the noise felt during handle rotation, such as roughness, has been significantly reduced by over 50% in the HYPERDRIVE DIGIGEAR.
HYPER ARMED HOUSING (Aluminum)
The HYPER ARMED HOUSING is a body system designed to provide high rigidity and precision, supporting the internal structure of the reel to deliver smooth winding and power. A key requirement is the use of metal materials for the frame, which, when combined with side plates and set plates, ensures that the reel's fundamental performance is maintained over an extended period.
HYPER TOUGH CLUTCH
The HYPER TOUGH CLUTCH system delivers precise on/off performance, maintaining its reliability through thousands of cycles. It is designed to be highly durable, even in saltwater environments with high salt concentrations. Featuring an advanced insulation structure, this system has achieved a 99% reduction in sticking-related repairs compared to DAIWA's previous clutch systems, showcasing its exceptional performance in harsh conditions.
TWS (T-Wing System)
Traditional level wind systems were designed, as their name suggests, to lay the line evenly across the spool. However, during casting, they often created resistance, leading manufacturers to experiment with different internal diameters and shapes to enhance line release. But these efforts had their limits. Excessive enlargement of the level wind compromised its original function, restricting advancements to minimal adjustments, such as refining the internal diameter. Some solutions included increasing the distance between the spool and the level wind or narrowing the spool width to prevent the line from hitting the level wind at sharp angles. While partially effective, these methods were essentially temporary fixes that led to side effects such as elongating the reel body, reducing palming comfort, or decreasing line capacity.
DAIWA's TWS (T-Wing System) addresses these contradictions not with compromise but with innovation, achieving both precise line winding and an expanded resistance-free range during line release. By significantly widening the resistance-free zone where the line makes contact with the level wind, particularly right after it leaves the spool, TWS has dramatically enhanced the long-casting performance of DAIWA baitcasting reels. Simultaneously, the smooth line flow facilitated by TWS has proven effective in preventing backlashes.
BF (Bait Finesse) CONCEPT
Optimized for ultra-light lures, the BF concept ensures that when you pitch with a flick of the rod, the lure glides smoothly on a low trajectory. It also delivers casting distances that rival or even surpass spinning reels. A key feature is the ability to seamlessly switch between pitching and regular casting without needing to readjust the braking force.
UTD (Baitcasting)
By re-evaluating the washers and grease from the ground up, DAIWA has refined the drag system to reduce initial resistance when a fish is hooked, ensuring the line starts to slip smoothly and consistently. This advanced drag system, which surpasses the previously established standards set by DAIWA, is designated as "UTD" (Ultimate Tournament Drag).
Tableau des spécifications du moulinet Daiwa 2023 Saltist TW PE Special
Gamme Daiwa 2023 Saltist TW PE Special
| Modèle | Poignée | Année | Eau salée ou douce | Poids (g) | Ratio d'engrenage | Récupération (cm/tour) | Frein max. (kg) | Capacité ligne tressée (lb-m) | Diamètre bobine (mm) | Bras de la poignée (mm) | Roulements (Bille/Rouleau) | Forme de la poignée |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8.1R | Droite | 2023 | Compatible eau salée | 180 | 8.1 | 76 | 3.5 | 12-50~100, 16-50~100 | 30 | 80 | 7/1 | I |
| 8.1L | Gauche | 2023 | Compatible eau salée | 180 | 8.1 | 76 | 3.5 | 12-50~100, 16-50~100 | 30 | 80 | 7/1 | I |
| 80XH | Droite | 2023 | Compatible eau salée | 185 | 8.1 | 81 | 4.5 | 16-150, 20-120 | 32 | 85 | 7/1 | Ronde |
| 80XHL | Gauche | 2023 | Compatible eau salée | 185 | 8.1 | 81 | 4.5 | 16-150, 20-120 | 32 | 85 | 7/1 | Ronde |
| 100XH | Droite | 2023 | Compatible eau salée | 200 | 8.1 | 86 | 5.5 | 20-200, 30-150, 40-100 | 34 | 100 | 7/1 | Ronde |
| 100XHL | Gauche | 2023 | Compatible eau salée | 200 | 8.1 | 86 | 5.5 | 20-200, 30-150, 40-100 | 34 | 100 | 7/1 | Ronde |
| 150XH | Droite | 2023 | Compatible eau salée | 220 | 8.4 | 94 | 6 | 40-200, 55-130 | 36 | 110 | 7/1 | Ronde |
| 150XHL | Gauche | 2023 | Compatible eau salée | 220 | 8.4 | 94 | 6 | 40-200, 55-130 | 36 | 110 | 7/1 | Ronde |
| 300XH | Droite | 2023 | Compatible eau salée | 300 | 8.1 | 109 | 8 | 55-200, 60-150, 80-120 | 43 | 110 | 7/1 | Ronde |
| 300XHL | Gauche | 2023 | Compatible eau salée | 300 | 8.1 | 109 | 8 | 55-200, 60-150, 80-120 | 43 | 110 | 7/1 | Ronde |
| 400XH | Droite | 2023 | Compatible eau salée | 310 | 8.1 | 109 | 8 | 55-330, 60-250, 80-180 | 43 | 110 | 7/1 | Ronde |
| 400XHL | Gauche | 2023 | Compatible eau salée | 310 | 8.1 | 109 | 8 | 55-330, 60-250, 80-180 | 43 | 110 | 7/1 | Ronde |
Spécifications en livres-yards
| Modèle | Poignée | Année | Eau salée ou douce | Poids (oz) | Ratio d'engrenage | Récupération (in/tour) | Frein max. (lb) | Capacité ligne tressée (lb-yd) | Diamètre bobine (in) | Bras de la poignée (in) | Roulements (Bille/Rouleau) | Forme de la poignée |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8.1R | Droite | 2023 | Compatible eau salée | 6.4 | 8.1 | 29.9 | 7.8 | 12-55~110, 16-55~110 | 1.18 | 3.15 | 7/1 | I |
| 8.1L | Gauche | 2023 | Compatible eau salée | 6.4 | 8.1 | 29.9 | 7.8 | 12-55~110, 16-55~110 | 1.18 | 3.15 | 7/1 | I |
| 80XH | Droite | 2023 | Compatible eau salée | 6.6 | 8.1 | 31.9 | 10 | 16-165, 20-130 | 1.26 | 3.35 | 7/1 | Ronde |
| 80XHL | Gauche | 2023 | Compatible eau salée | 6.6 | 8.1 | 31.9 | 10 | 16-165, 20-130 | 1.26 | 3.35 | 7/1 | Ronde |
| 100XH | Droite | 2023 | Compatible eau salée | 7.1 | 8.1 | 33.9 | 12.2 | 20-220, 30-165, 40-110 | 1.34 | 3.94 | 7/1 | Ronde |
| 100XHL | Gauche | 2023 | Compatible eau salée | 7.1 | 8.1 | 33.9 | 12.2 | 20-220, 30-165, 40-110 | 1.34 | 3.94 | 7/1 | Ronde |
| 150XH | Droite | 2023 | Compatible eau salée | 7.9 | 8.4 | 37 | 13.3 | 40-220, 55-145 | 1.42 | 4.33 | 7/1 | Ronde |
| 150XHL | Gauche | 2023 | Compatible eau salée | 7.9 | 8.4 | 37 | 13.3 | 40-220, 55-145 | 1.42 | 4.33 | 7/1 | Ronde |
| 300XH | Droite | 2023 | Compatible eau salée | 10.7 | 8.1 | 42.9 | 17.8 | 55-220, 60-165, 80-130 | 1.69 | 4.33 | 7/1 | Ronde |
| 300XHL | Gauche | 2023 | Compatible eau salée | 10.7 | 8.1 | 42.9 | 17.8 | 55-220, 60-165, 80-130 | 1.69 | 4.33 | 7/1 | Ronde |
| 400XH | Droite | 2023 | Compatible eau salée | 11.1 | 8.1 | 42.9 | 17.8 | 55-365, 60-275, 80-200 | 1.69 | 4.33 | 7/1 | Ronde |
| 400XHL | Gauche | 2023 | Compatible eau salée | 11.1 | 8.1 | 42.9 | 17.8 | 55-365, 60-275, 80-200 | 1.69 | 4.33 | 7/1 | Ronde |
Consultés récemment